AtlasIED – T112


More details

Similar Products

C10-1_Front_Web_A
  • Ampetronic

Ampetronic – C10-1 Dante

The C10-1 Series hearing loop drivers from Ampetronic mark a substantial development in assistive listening technology. C-Series units feature digital signal processing and enable fast, accurate setup and adjustment via a very simple and easy to use user interface.
    Amplifiers
  • Dante Ch: 2x0
  • 24-bit
ied-1581NA-D
  • AtlasIED

AtlasIED – IED1581NA-D

This product has reached "end-of-life" and is discontinued by the manufacturer The 1581NA-D is a compact power amplifier module capable of driving small loudspeaker loads in a GLOBALCOM® system. It provides a single output with 8 watts of power into an 8Ω load.The audio inputs to the module are through the Ethernet audio network and are configured from the GLOBALCOM® System Management Center. The 1581NA-D model allows the use of Dante™ audio networking protocols.The 1581NA-D is powered using standard PoE and draw a maximum power of 13 watts. If PoE equipment is not used, an input is provided for an external +48VDC power supply. A green power indicator LED is included to show that the unit is powered on. Each channel has a green LED indicator that illuminates when signal is present and a yellow LED to indicate clipping. Another yellow LED illuminates to indicate that the device is in thermal overload. When this condition occurs, the device will stop passing signal until the condition has cleared.The amplifier is provided in an enclosure that either mounts to a DIN rail or is screwed down on a panel or wall to allow for convenient installation in remote closets close to the loudspeaker zone.Features
  • Available in single-channel or two-channel configurations
  • Available with Dante™ audio network interface
  • Control and configure using a web browser and GLOBALCOM® System Management Center
  • Settings storage in non-volatile memory
  • Full integration with theAtlasIED GLOBALCOM® vACS
  • Utilizes IEEE 802.af Power over Ethernet (PoE)
  • Removable connectors for easy installation
  • Rugged DIN-rail or panel/wall mount enclosure
    Amplifiers
DTH1620_Front
  • Attero Tech by Q-SYS

Attero Tech by Q-SYS – Axon DTH1620

The Attero Tech by QSC DTH1620 is multi-channel, low-power (16-channel x 20 watts) Dante/AES67 network amplifier, designed for themed entertainment usage and other specialized audio applications, and optimized for integration into the Q-SYS Ecosystem.

    Amplifiers
  • Dante Ch: 16x0
  • AES67 Enabled