Cart
← Back to Product Catalog

Asystems – NT1308D

Amplifiers

Similar Products

crown-audio-DCi-4-600da|crown-audio-DCi-4-600da
  • Crown Audio

Crown Audio – Dci 4|600DA

Crown Audio's DCi 4|600DA is a four-channel, 600W Power Amplifier with Dante™ / AES67 Networked Audio, 2/4/8Ω and 70V/100V. Crown Audio's DCi 4|600DA is a four-channel, 600W Power Amplifier with Dante™ / AES67 Networked Audio, 2/4/8Ω and 70V/100V. For applications that require Dante or AES67 networked audio, the Crown DriveCore Install DA Series provides a balanced combination of output power, channel count and speaker load flexibility along with proprietary DriveCore® technology for superb efficiency and exemplary audio quality. The DCi DA Series includes a high-powered DSP with JBL speaker tunings, network control/monitoring, and the ability to drive 2/4/8/16 ohm, 70V and 100V speaker loads. The amp’s advanced capabilities and support for Dante Domain Manager makes it perfect for installations that have standardized on Dante for networked audio transport.
    Amplifiers
  • Dante Ch: 16x16
  • 24-bit
See the product
  • STTEK

DCS-AMP12004

The DCS-AMP12004 is a high-performance power amplifier that combines Class-D amplification technology with an SMPS switched-mode power supply and is designed for large-scale audio system applications. Its compact size, low power consumption, and high efficiency deliver reliable performance for demanding installations. Intelligent power sharing further enhances system flexibility by dynamically allocating available power across channels for maximum utilisation. One of the key strengths of the DCS-AMP12004 is its intelligent power sharing capability. A total output of 1200 W can be flexibly distributed across four channels, with up to 600 W available per channel. This allows the system to adjust channel output dynamically according to actual load requirements, avoiding the inefficiencies associated with conventional fixed-power designs. It is particularly well suited to complex applications such as public address systems, multi-zone music systems, airports, metro systems, nuclear power plants, and sports venues.    
    Amplifiers
  • Dante Ch: 4x4
  • 16-bit
See the product
stewart-audio-CVA16-1-CV-D
  • Stewart Audio

Stewart Audio – CVA16-1-CV-D

The PoE+ Amplifier Series leverages the higher power 802.3at PoE+ standard (30W port power) to power two amplifier models, the AV8-2-LZ-D (8W x 2 @ 4/8Ω) and the CVA16-1-CV-D (16W x 1 @ 70V/100V). The PoE+ Amplifier Series leverages the higher power 802.3at PoE+ standard (30W port power) to power two amplifier models, the AV8-2-LZ-D (8W x 2 @ 4/8Ω) and the CVA16-1-CV-D (16W x 1 @ 70V/100V). These compact Dante™ amplifiers are designed to be single cable solutions for smaller zones without the need for a local power outlet. This amplifier series leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it. Simply plug the PoE+ CAT 5e/6 cable into the amplifier, wire the speakers and route audio and repeat for the next zone. The plenum rating and compact size, allows this amplifier series to be placed in the air handling space, closets, the rack or any other convenient space. The confluence of readily available and inexpensive CAT 5e/6 cabling, Dante™ networked audio and quick installation, makes this amplifier series an essential problem solver.
 
    Amplifiers
See the product