Cart
← Back to Product Catalog

Asystems – NT1304D

Amplifiers

Similar Products

CgAH6F_pWhOAdSKGAAC310gLzwI133
  • Soundking

Soundking – AKD500

AK series Dante network amplifier, with analog /digital automatic backup switching function, the analog signal will switch automatically when there is a problem with the digital signal, ensuring that the signal is not terminated due to device failure. The product is divided into two channel and four channel two specifications, using Dante, AES digital audio input, 10 channel signal input can be matrix selection and mutual thermal backup, intelligent network monitoring, and center control. PFC switch power supply, high performance DSP sound control with FIR balance, AGC automatic overload protection, square wave self-load impedance suppression. Intelligent temperature control with overheat protection, constant resistance and constant pressure.

※Optional functions: remote switch, center control shutdown, remote maintenance, sound channel backup, speaker intelligent control and others.

Applications: Acoustic systems in large government projects, large stadiums, cultural centers, etc.

    Amplifiers
See the product
ashly-nXp-8004_600px|ashly-nXp-8004_600px
  • Ashly Audio

Ashly – nXp8004d

The nXp8004d is a 4 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 800W per channel at Low Z, 70V, and 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.
    Amplifiers
  • Dante Ch: 4x0
  • 24-bit
See the product
kling-freitag-d-20-4_1200px
  • Kling & Freitag

Kling & Freitag – D 20:4

The D 20:4 is a 4 channel power amplifier platform for all the K&F speaker systems. The D 20:4 is a 4 channel power amplifier platform for all the K&F speaker systems. Features
  • 'Rational Power Management' (RPM) for flexible power distribution
  • Lake® platform loudspeaker management and system control
  • Scaleable and combinable with additional K&F D Series and K&F PLM+ Series SystemAmps
  • Worldwide useable due to the 'Power Factor Correction' power supply
  • AES3, analogue and redundant Dante™ Inputs/Outputs
  • Rugged and compact 1U rackmount chassis for durability in installation applications
    Amplifiers
See the product