Cart
← Back to Product Catalog

ALLDSP – SMA-6P2408

Amplifiers

More details

Similar Products

mc2-audio-delta-100_1200px
  • MC2 Audio

MC2 Audio – Delta 100

Delta Series offers  the assurance of MC2’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking. Delta Series offers  the assurance of MC2’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking. A rear panel switch allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante, which is then converted using 24 bit 96kHz DACs. Connect to a Delta DSP amplifier using a single CAT5 cable to realise a stereo 4 way system with no further external processing required. Switch back to analogue to use as a powerful traditional quad channel amplifier. Run bridged channel pairs or link adjacent inputs for total flexibility in either analogue or digital mode.
    Amplifiers
  • Dante Ch: 4x0
  • 24-bit
See the product
panasonic-wp-dn360
  • Panasonic Connect

Panasonic – WP-DN360

The WP-DN360 is a digital amplifier with high efficiency and high reliability design.  The WP-DN360 is a digital amplifier with high efficiency and high reliability design. 
  • WP-DN 360 is 4 ch with maximum output 560 W × 4 (4 Ω load)
  • Due to the adoption of class D amplifier circuit and switching power supply, power loss is greatly reduced and space saving is realized. 
  • Equipped with a muting circuit to prevent pop noise when turning on / off the power switch. 
  • Overcurrent protection circuit that prevents overdrive in case of overload · output short circuit, equipped with overtemperature protection circuit to prevent abnormal heating of the power supply circuit · output circuit. 
  • Speaker protection circuit protects the speaker by cutting off the output when the output circuit fails. 
  • Equipped with protect indicator lights, inform the operating status of the protection circuit and system oscillation (when signals exceeding 20 kHz are continuously input). 
  • Corresponds to EIA rack mount. 
  • BTL (Bridged Trans- connect) connection that uses output of 2 ch as output of 1 ch can be used as a power amplifier of 1120 W × 2 (8 Ω load) with WP-DN 360.
    Amplifiers
See the product
KE_Audio_-_KE1000B_0|KE_Audio_-_KE1000B_0
  • KE Audio

KE Audio – KE1600A

“KE” intelligent power amplifier built-in DSP has: high performance double 32 - bit audio dedicated floating-point processor, high performance A/D, D/A converter. Each channel has 5 parametric equalizer, all parameters are adjustable. Multiple frequency division mode, 6db, 12db, 24db or 48db NingKe. Each channel has its own latency, maximum 80 ms and 0.1 ms delay interval. Each channel is independent of compressors and limiter, all parameters can be adjusted; Function of phase inversion, digital noise gate. 30 users memory, intuitive and friendly computer interface, RJ45 interface, Channel Copy function, convenient debugging KE1600A is a two channel intelligent power amplifier. “KE” intelligent power amplifier built-in DSP has: high performance double 32 - bit audio dedicated floating-point processor, high performance A/D, D/A converter. Each channel has 5 parametric equalizer, all parameters are adjustable. Multiple frequency division mode, 6db, 12db, 24db or 48db NingKe. Each channel has its own latency, maximum 80 ms and 0.1 ms delay interval. Each channel is independent of compressors and limiter, all parameters can be adjusted; Function of phase inversion, digital noise gate. 30 users memory, intuitive and friendly computer interface, RJ45 interface, Channel Copy function, convenient debugging “KE” intelligent power supply of the power amplifier is quasi resonant full bridge topology, the high-frequency transformer magnetic core uses cutting-edge technology of nanomaterials. It has the advantage of high power efficiency, big power, and uses high power tube as the full bridge switch tube, the power of the internal resistance is low. It can provide high current moment to load.
    Amplifiers
See the product