AEQ – BC-2000D


More details

Similar Products

aeqnetboxdsp
  • AEQ

AEQ – NETBOX DSP

The NETBOX DSP is able to receive audio from the Dante network and then return it, mixed and processed, to be used in another device or subsystem. It can also generate test signals and vumeters. Effectively, it is an audio matrix for AoIP networks. The NETBOX DSP is able to receive audio from the Dante network and then return it, mixed and processed, to be used in another device or subsystem. It can also generate test signals and vumeters. Effectively, it is audio matrix for AoIP networks. NETBOX DSP can be used in combination with any AEQ or third-party device from more than 350 manufacturers which are compatible with Dante AoIP protocol. NETBOX DSP also incorporates 16 GPI and 16 GPO (each GPIO connector includes a power supply pin in order to feed external circuitry). GPIO can also be transported through the IP network between compatible devices. This way, a GPIO can drive the GPOs in different piece of equipment.
    DSPs (Digital Signal Processors)
  • Dante Ch: 64x64
  • AES67 Enabled
201808081728582858
  • Tendzone

Tendzone – SOLON M440 Dante Plus

SOLON M440 Dante Plus is a 4×4 networking audio digital signal processor with a 16×16 Dante module.

Features:

  • 24bit/48kHz sound quality
  • Enhanced microphone gain, 54dB pre-amp gain, 8 levels of gain for users to choose
  • Full featured matrix mixer
  • Adaptive feedback cancellation
  • Automatic gain control
  • Automatic echo cancellation
    DSPs (Digital Signal Processors)
DNT0212_Straight_TDsheet|DNT0212_Straight_TDsheet
  • Lectrosonics

Lectrosonics – DNT0212

The DNT0212 processor subscribes to channels on a Dante network and delivers them to an internal digital matrix for automatic mixing and processing, and to Dante network transmit channels. In addition, two analog line level inputs are provided for use with local sources audio sources such as voice evacuation announcements.The outputs of the matrix can be assigned to a Dante transmit channel, an analog output and/or routed back to an input to be further mixed and processed with another input channel or matrix mix.
    DSPs (Digital Signal Processors)
  • Dante Ch: 32x16
  • 48kHz