Relacart latest innovation, the ACM-600 AI Ceiling Microphone Array, combines cutting-edge AI technology and advanced acoustic engineering to deliver unparalleled audio quality for any space. This ceiling-mounted solution is not just a technological breakthrough but a versatile tool for environments like conference rooms, classrooms, and auditoriums, ensuring every word is captured with precision and clarity.
MT48
THE PERFECT LINK The MT 48 brings Neumann quality to the digital workflow. It is the first audio interface in its class that is able to capture the full dynamic range of Neumann microphones and is optimally matched to the KH-Line of studio monitors and Neumann headphones. The result is an ideal signal chain without any bottlenecks: uncompromising sound quality from the microphone diaphragm to your ear.
SWISS PRECISION INSIDE The MT 48 was developed in close cooperation with the Swiss manufacturer Merging Technologies, whose high-precision AD converters offer a staggering dynamic range of 136 dB. This gives the MT 48 four times the resolution of comparable audio interfaces. The MT 48 comes fully equipped for the reference-class personal studio: two extremely low-noise mic/line preamps with up to 78 dB gain, two line/instrument inputs, four monitor/line outputs and two superb headphone outputs, each with state-of-the-art AD/DA converters.
The MT 48’s connectivity may be expanded via ADAT / S/PDIF and AES67; a MIDI interface is also integrated. Four separate monitor mixes can be controlled directly on the unit via touchscreen. On-board processing includes a fully parametric 4-band EQ and a 3-way dynamics processor (gate/compressor/limiter) per channel as well as a high-quality reverb. So musicians get inspiring sound for top performances. And there is still plenty of DSP power for future developments.
N-DR1
N-Series offers the N-DR1 Digital Dual Channel Receiver, designed with ease-of-use in mind and packed with high-end functionality.
Key features:
- Wideband – 470 – 870 MHz bandwidth in each unit
- Sleek front panel design offers an easy overview of features
- LAN control with built-in switch for loop through
- Dante® Switched and Redundancy modes
- Antenna inputs with power for active antennas and active loop through
- Analog output (optional)
- 126 dB true dynamic range
A20-Nexus
SpectraBand SpectraBand technology delivers a tuning range of 470 – 1525 MHz in a single unit – an industry first. Experience ultimate flexibility as you find open spectrum away from the crowded UHF TV band. The included A20-Monarch antennas can receive the entire 470-1525 MHz range, keeping your kit small and tidy. NexLink Control your A20-Mini transmitter using the built-in long range remote control link. NexLink’s advanced long distance modulation reaches even farther than the A20-Mini’s long-range audio transmission.
Network away You’ve got options. Configure your A20-Nexus for Dante audio, use the built-in web server to control the receiver using the web browser on any computer, tablet, or phone, and even power the A20-Nexus remotely using Power-over-Ethernet (PoE). Real time spectrum analysis The days of waiting for a frequency scan to complete are over. Instantly visualize the fluctuating RF spectrum around you in real time – while running all channels of the audio. GainForward With the A20-Mini’s GainForward Architecture, easily set the Mini’s gain, low-cut, and limiter directly on your A20-Nexus or mixer-recorder. This immediate, local control of gain means never having to adjust the gain on the transmitter again.
Go cableless . Thanks to its half-rack size, the A20-Nexus is equally at home in a rack, in a bag, or docked to an 8-Series mixer recorder for a cableless kit. Long range The A20-Nexus and A20-Mini deliver the longest transmission distance of any system on the market.¹ The state-of-the-art, 100% digital long-range modulation offers the same great audio quality (10 Hz – 20 kHz) as our Standard modulation scheme with a longer range for both line-of-sight and heavy multipath transmission. Shoot for the stars The A20-Nexus joins the growing lineup of Sound Devices Astral™ wireless products. With industry-leading features like SpectraBand, GainForward, NexLink, long range modulation, real time spectrum analysis, and more, the Astral Series pushes the bounds of wireless audio.
µMA04/POE
µMA04/POE redefines PoE audio in commercial AV. The µMA04/POE is a Dante-ready, 4-channel PoE amplifier featuring the advanced DSP package found in our Maxx Series. It delivers 4×120W @ 4Ω/8Ω or 240W @ 8Ω when bridging two channels, making it the most powerful PoE amplifier on the market. For full power, it requires a PoE++ switch or injector (IEEE 802.3bt) but also supports PoE and PoE+ for lower-power applications. Maximize the benefits of PoE—streamlined deployment and efficiency—without the sonic compromises typical of PoE solutions. Pair the µMA04/POE with your preferred passive loudspeaker to create a PoE-powered audio system fit for critical listening applications.
DP648
The DP648 retains the popular 4-input, 8-output format and features an optional Dante card, allowing for a combination of AES3, analog, and Dante/AES67 to be used. Comprehensive system processing is provided by dedicated input and output processing similar to the DP448 but enhanced with the multiband dynamic DEQ algorithms from the XTA DP548 and SIDD processors.
The system offers full front panel control and Ethernet remote control via Audiocore Amped Edition, with integration in globcon XTA MC² Edition coming later this year. The combination of dynamics processing, IIR, all-pass, and phase filters, paired with very low latency (0.5ms), makes it the perfect choice for system engineers managing live shows, theatres, and clubs.
The DP648 is supported by an extensive preset library and introduces the X Channel Preset concept built into XTA hardware for the first time.
The DP648 completes the system for XTA. The MX36 provides fast source switching, the DP648 offers comprehensive system management, and its DPA and DNA amplifiers bring the power to drive systems large and small. Control is enhanced by the grouping system which works across multiple DP648 processors and DPA amplifiers. The 32 groups behave like a virtual 32-output processor.
IX60:4
The IX60:4 is a 4-channel networked DSP amplifier with 6 kW total output power. Capable of driving Hi-Z or Lo-Z loads with powerTANK technology, the IX60:4 is ideal for a wide range of applications including sports venues, houses of worship, live performance spaces and hospitality.
IX60:4 features eight (8) Dante inputs, eight (8) Dante outputs and four (4) mic/line inputs that can be used as Dante break-in points. The natively operating 96 kHz DSP features a fully equipped 12 x 12 matrix mixer, EQs, dynamics, Dynacord FX and FIR-Drive capability. All 12 inputs feature pilot-tone detection, while the eight (8) Dante and four (4) amplifier outputs allow to add pilot tones up to 30 kHz.
The IX60:4 uses Dynacord‘s patented ecoRAIL technology for optimizing energy consumption. ghostPOWER via POE maintains the entire DSP, the Dante network and all mic/line inputs active, independent of the mains power. The integrated MXEstyle TaskEngine allows for system automation, scheduling, control, and integration to third party devices.
IX series is fully integrated in Dynacord‘s SONICUE Sound System Software and can be used as a SONICUE control server, for direct use with the WPN1 wall panel as well as TPC-1, iOS and Windows devices.
IX30:8
The IX30:8 is an 8-channel networked DSP amplifier with 3 kW total output power. Capable of driving Hi-Z or Lo-Z loads with powerTANK technology, the IX30:8 is ideal for a wide range of applications including sports venues, houses of worship, live performance spaces and hospitality.
IX30:8 features eight (8) Dante inputs, eight (8) Dante outputs and eight (8) mic/line inputs that can be used as Dante break-in points. The natively operating 96 kHz DSP features a fully equipped 16 x 16 matrix mixer, EQs, dynamics, Dynacord FX and FIR-Drive capability. All 16 inputs feature pilot-tone detection, while the eight (8) Dante and eight (8) amplifier outputs allow to add pilot tones up to 30 kHz.
The IX30:8 uses Dynacord‘s patented ecoRAIL technology for optimizing energy consumption. ghostPOWER via POE maintains the entire DSP, the Dante network and all mic/line inputs active, independent of the mains power. The integrated MXEstyle TaskEngine allows for system automation, scheduling, control, and integration to third party devices.
IX series is fully integrated in Dynacord‘s SONICUE Sound System Software and can be used as a SONICUE control server, for direct use with the WPN1 wall panel as well as TPC-1, iOS and Windows devices.
IX30:4
The IX30:4 is a 4-channel networked DSP amplifier with 6 kW total output power. Capable of driving Hi-Z or Lo-Z loads with powerTANK technology, the IX30:4 is ideal for a wide range of applications including sports venues, houses of worship, live performance spaces and hospitality.
IX30:4 features eight (8) Dante inputs, eight (8) Dante outputs and four (4) mic/line inputs that can be used as Dante break-in points. The natively operating 96 kHz DSP features a fully equipped 12 x 12 matrix mixer, EQs, dynamics, Dynacord FX and FIR-Drive capability. All 12 inputs feature pilot-tone detection, while the eight (8) Dante and four (4) amplifier outputs allow to add pilot tones up to 30 kHz.
The IX30:4 uses Dynacord‘s patented ecoRAIL technology for optimizing energy consumption. ghostPOWER via POE maintains the entire DSP, the Dante network and all mic/line inputs active, independent of the mains power. The integrated MXEstyle TaskEngine allows for system automation, scheduling, control, and integration to third party devices.
IX series is fully integrated in Dynacord‘s SONICUE Sound System Software and can be used as a SONICUE control server, for direct use with the WPN1 wall panel as well as TPC-1, iOS and Windows devices.
IX60:8
The IX60:8 is an 8-channel networked DSP amplifier with 6 kW total output power. Capable of driving Hi-Z or Lo-Z loads with powerTANK technology, the IX60:8 is ideal for a wide range of applications including sports venues, houses of worship, live performance spaces and hospitality.
IX60:8 features eight (8) Dante inputs, eight (8) Dante outputs and eight (8) mic/line inputs that can be used as Dante break-in points. The natively operating 96 kHz DSP features a fully equipped 16 x 16 matrix mixer, EQs, dynamics, Dynacord FX and FIR-Drive capability. All 16 inputs feature pilot-tone detection, while the eight (8) Dante and eight (8) amplifier outputs allow to add pilot tones up to 30 kHz.
The IX60:8 uses Dynacord‘s patented ecoRAIL technology for optimizing energy consumption. ghostPOWER via POE maintains the entire DSP, the Dante network and all mic/line inputs active, independent of the mains power. The integrated MXEstyle TaskEngine allows for system automation, scheduling, control, and integration to third party devices.
IX series is fully integrated in Dynacord‘s SONICUE Sound System Software and can be used as a SONICUE control server, for direct use with the WPN1 wall panel as well as TPC-1, iOS and Windows devices.