• AUDINATE > share

Dante Device Firmware

Firmware updates are released by Audinate to our licensed manufacturers. Below lists the latest firmware versions available for Dante modules. You can find the module of your device by going to the Status tab in the Dante Controller > Dante Firmware Version.

Broadway – v4.2.6.4

Brooklyn 2 – 4.2.3.13

Brooklyn 3 – 4.2.7.7

DEP – v1.3.3.5

Ultimo – 4.0.11.3

UltimoX – 4.2.8.2

Zync IP Core (HC), Zync IP COre (DDR), Ultrascale+ (HC) and Ultrascale+(SC) are all 4.2.7

Skye HC – 4.1.2.1

Summit HC – 4.0.10.3

If your Dante device is running an older firmware version, please check for any available updates through the Dante Updater application that is accessed through the Dante Controller. If your device does not have the version specified above, please contact your device manufacturer.

Still stuck?

Let’s connect

Connect with a Dante expert and get the support you need.

Contact support
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.