Shure – ANI4IN-BLOCK


More details

Similar Products

fp-nml2p
  • RDL

RDL – FP-NML2P

The FP-NML2 is a high quality Dante network to mic/line interface that converts two Dante channels to two balanced outputs. Each output is individually switch-selectable to mic or line level. The FP-NML2 is ideal for adapting standard audio amplifiers or equipment to a Dante network. Model FP-NML2P operates from PoE. The FP-NML2 is a high quality Dante network to mic/line interface that converts two Dante channels to two balanced outputs. Each output is individually switch-selectable to mic or line level. The FP-NML2 is ideal for adapting standard audio power amplifiers, or other audio equipment, to a Dante network. Each line output provides +4 dBu balanced for a network digital audio level of -18 dBFS. Crosstalk is below the noise floor between all outputs across the entire audio spectrum. The noise floor is better than 80 dB below operating level with greater than 18 dB of headroom. The FP-NML2 operates from 24 Vdc and is available in a PoE version: FP-NML2P. If PoE power and an external 24 Vdc supply are both feeding an FP-NML2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. 
    I/O Interfaces
hpa-poe-dc-ut
  • Micromedia

Micromedia – Digimedia HPA UT

Digimedia HPA UT is a professional studio-grade 2 channel Dante™ interface with analog headphone output. On board is a high quality DAC from TI/Burr Brown with typical S/N 114dB and a high class amplifier with up to S/N 120dB. Enclosure specially designed for under table mount. Digimedia HPA UT is a professional studio-grade 2 channel Dante™ interface with analog headphone output. On board is a high quality DAC from TI/Burr Brown with typical S/N 114dB and a high class amplifier with up to S/N 120dB. There is Dante Domain Manager and AES67 support build in. Interface has PoE (Power over Ethernet) or can be powered with external 12V DC. Professional high quality Neutrik jack audio connectors with gold contacts for long life. Enclosure specially designed for under table mount.
    I/O Interfaces
Dante官网logo
  • BARE

BARE – BL-205

1: It is an efficient vertical line array system suitable for high-quality sound reinforcement places such as high-end multifunctional conference halls, small and medium-sized theaters and theaters. The high frequency part adopts the unit module of PET patented acoustic lens conversion technology, which does not have the typical polar convex angle (beam control) effect of traditional horn and woofer when used together. The precise design makes each frequency band perfectly match, at any frequency The overall wavefront coherence is ideally matched, so that the sound of the same sound quality is from near to far in the entire sound field. 2: BL-205 provides a precise coverage angle, which can be composed of multiple modes of systems to meet the needs of sound reinforcement in different places; the horizontal coverage angle is 90°, and the vertical coverage angle is 0°-10°, for the sound reinforcement system designer Provides a precise multi-purpose installation system. Its balanced integrated suspension system makes installation quick and easy and labor-saving. Unit configuration: 2 x 5 inches mid-bass +1 x 1.44 inches strong magnetic plane wave generator 3: L-205 speaker features: the cabinet structure uses high-quality 15 cm plywood, acoustic simulation calculation combined with speaker characteristics to form a closed sound system, its advantage is that the scientific use of acoustics and aerodynamics makes the entire speaker controllable Performance, sound pressure level, and horn service life have been greatly improved, achieving high sound pressure for small horns, and setting effective and complete protection devices in the speaker system, so that the speaker group will not burn out under relatively high sound pressure for a long time. 4: Applicable venues: small stadiums, small performance systems, theaters, concert halls, performing arts centers, conference centers
    I/O Interfaces