RTS – DKP 16 CLD


More details

Similar Products

rts-KP-3016_1200px|rts-KP-3016_1200px
  • RTS

RTS – KP-3016 Keypanel

Part of the KP-Series keypanel family, the KP-3016 provides the same superior digital audio as the flagship KP-4016 model by using OMNEO media networking technology (developed by RTS parent company Bosch and incorporating Dante™ high-quality audio over IP) as well as analog technology. For the analog-only users, the KP-3016A is available. Both versions deliver top-notch sound quality, free of noise, delay, and other artifacts present in older technology Features
  • Wide viewing-angle color screen
  • Ergonomic levers for talk/listen
  • Full support for OMNEO - KP-3016 Only
  • Support for 4-wire analog connection
  • Expansion panel option availableBuilt-in speaker
  • Microphone input for dynamic or electret mics
  • User-replaceable XLR headset connector – 4- or 5-pin available
    Intercoms
  • 24-bit
  • AES67 Enabled
Beatrice_B4_Plus_Angle
  • Glensound

Glensound – Beatrice B4+

The Beatrice B4+ is Glensound's first Broadway design unit, with 4 x FW & 4 x IFBs to the Dante/AES67 Network. The B4+ can interfacewith 4 completely separate network locations.

The deisgn of the B4+ is ultra compact to make the unit as unobtrusive to the operator as possible.

The microphone input is on a 3 pin XLR and features gain adjust and 48V phantom power. The XLR connector can be specified with 4 or 5 pins for headset connections.

Four separate talk buttons route the microphone input to either of the 4 network outputs. The button operation can be configured as momentary, latching or intelligent. A double tap on any of the talk buttons will produce a 'call' signal alert that will be received by another Beatrice unit. An LED indicates an incoming call alert, which will also produce an audio indication on the headphones.

Each input has a separate level control adjust and a signal present indicator.

    Intercoms
  • Dante Ch: 4x4
  • 48kHz
beatricew4
  • Glensound

Glensound – Beatrice W4

This device uses Audinate's Ultimo Chipset, which can receive 4 incoming audio channels, each at 48kHz. However, this chipset can only receive these 4 audio channels from a maximum of 2 network locations (2 different devices). This is common with any manufacturer that uses this chipset.

The Beatrice W4 is a single user interface for the Beatrice system, designed to mount flush on a wall or into a desk. it is a useful intercom position allowing two way communication to be possible at standing levels whilst mounted into walls, or at desk level if mounted on a Desk.

    Intercoms
  • Dante Ch: 4x4
  • 48kHz