Cart
← Back to Product Catalog

RDL – RU-FN

I/O Interfaces

More details

Similar Products

digigram-AUDIOWAY-bridge-B3_1200px_0
  • Digigram

Digigram – Audioway Bridge B2

The BRIDGE B2 is an intelligent gateway between MADI digital audio and AES67/Dante™ synchronous audio-over-IP streams. Forming the backbone of your infrastructure, the BRIDGE B2 is the ideal solution to distribute and interconnect your MADI and AES67/Dante mission-critical streams in the studio. The BRIDGE B2 is an intelligent gateway between MADI digital audio and AES67/Dante™ synchronous audio-over-IP streams. Forming the backbone of your infrastructure, the BRIDGE B2 is the ideal solution to distribute and interconnect your MADI and AES67/Dante mission-critical streams in the studio.
  • Stainless steel 1U chassis power consumption <50 W
  • Front panel control interface for rapid overview of current status
  • Dual AC/DC power supply 4 configurable GPIOs Wordclock synchronisation 24-bit audio routing: 44.1 kHz to 96 kHz
  • AES67/Dante interface: 64-in/64-out EtherCON connector AoIP stream redundancy Integrated 4-port switch
  • MADI interface: 1 x optical 64-in/64-out connector 1 x BNC 64-in/64-out connector
    I/O Interfaces
See the product
DIO1616MAXLRfb
  • CTP Systems

CTP Systems – DIO1616MA-XLR

The DIO1616MA-XLR is a Dante enabled interface converting sixteen analogue microphone or line level inputs to Dante streams. The unit also converts Dante streams to sixteen line level analogue outputs. All microphone/line level inputs have adjustable gain from +65dB to -12dB and the analogue outputs from +12dB to -12dB in 1dB steps. Phantom power may be selected to each microphone input. The unit operates at 48kHz and 96kHz and network connection may be copper and/or fibre and is PoE enabled. The DIO1616MA-XLR is a Dante enabled interface converting sixteen analogue microphone or line level inputs to Dante streams. The unit also converts Dante streams to sixteen line level analogue outputs. All microphone/line level inputs have adjustable gain from +65dB to -12dB and the analogue outputs from +12dB to -12dB in 1dB steps. Phantom power may be selected to each microphone input. Network connections may be copper and/or fibre via two SFPs and the unit includes connections for network redundancy. The DIO1616MA is PoE enabled so may be operated without a mains supply if required. All level control and phantom switching is adjusted using the built in web server. The unit operates at sample rates of 48kHz and 96kHz. The unit will also operate in AES67 mode. Power is PoE or mains 110-240 VAC 50/60Hz auto switching. Dimensions 2RU, 300mm deep.
    I/O Interfaces
  • Dante Ch: 16x16
  • 48kHz-96kHz
See the product
shure-ani22_1000px|shure-ani22_1000px
  • Shure

Shure – ANI22

The ANI22 device can bring up to two line / mic signals onto or from a Dante network for easy audio routing and convenient browser-based remote control. Available in XLR and block connector. The ANI22 device can bring up to two line / mic signals onto or from a Dante network for easy audio routing and convenient browser-based remote control. Available in XLR and block connector. More flexibility for every kind of application where it is required to get analog audio onto and from a Dante network: The ANI22 Audio Network Interface complements the existing ANI4IN and ANI4OUT products, and is available with XLR and block connectors. It brings up to two line / mic signals onto or from a Dante network for easy audio routing and convenient browser-based remote control.
    I/O Interfaces
  • Dante Ch: 2x2
  • 24-bit
See the product