Quicklink - TX

Quicklink – TX

Product Information

The Quicklink TX is a professional hardware solution that integrates Skype calls into broadcast production, leveraging Dante for audio over IP.

Quicklink TX is a Skype TX-based video calling production system designed for television studios and live event producers who wish to integrate the millions of available Skype users into their live programs. It offers 2 channels of HD-SDI I/O, active management of core technical information including bit rate and video resolution, and full AoIP connectivity via Dante. Quicklink TX flexibly and easily fits in to any broadcast studio, control room or live production environment.

Sonifex – AVN-AI16 16 Input Dante® Interface, PoE

The AVN-AI16 audio converter and interface converts up to sixteen analogue inputs to the Dante Audio-over-IP networking standard. This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up, except line-up levels, done via the standard Dante Controller software and power via PoE (Power Over Ethernet).

All analogue inputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for PoE, Link, and Clock. Global 0dBFS line-up can be set to +12dBu, +18dBu or +24dBu to meet your specific requirement via the front panel recessed toggle switch.

I/O Interfaces

See the product

Equipson

Equipson – DD4

DD4 devices are gateways used to convert DANTE (Digital Audio Network Through Ethernet - developed by AUDINATE) protocol. These devices allow the extraction of analog audio signals from the DANTETM network as well as the introduction of analog channels within the same network.

DD4 is a device designed for use in installation, for which the analog inputs and outputs are made through Euroblock 3.5mm connectors.

It has balanced inputs and outputs to provide greater immunity to noise that interferes with audio signal lines.

I/O Interfaces

See the product

Inter-M

Inter-M – DAC-288

The DAC-288 is a digital audio transport system utilizing Audinate’s DanteTM network audio solution. The DAC-288 connects to your network with a single Ethernet cable. It offers eight channels (2 mic/line selectable) of line-level analogue in and out, using precision 24-bit A-D and D-A conversion for superb audio performance, and 119dB dynamic range at sample rates up to 192kHz. This product is used as the audio matrix, each having eight inputs, where you can send uncompressed audio with low latency using standard TCP/ IP Ethernet network.

I/O Interfaces

See the product

Quicklink – TX

Product Information

Similar Products

Sonifex – AVN-AI16 16 Input Dante® Interface, PoE

Equipson – DD4

Inter-M – DAC-288

Support

Company

Dante Networking Alliance

Quicklink – TX

Product Information

Similar Products

Sonifex – AVN-AI16 16 Input Dante® Interface, PoE

Equipson – DD4

Inter-M – DAC-288

I would like to receive product notices, training and event information and Dante product marketing updates via email. Opt-out at any time. For further details, including about your rights, see our Privacy Policy.