Cart
← Back to Product Catalog

PreSonus – StudioLive 328AI

Speakers

More details

Similar Products

worxaudio-waveseries-18S_600px|worxaudio-waveseries-18S_600px
  • WorxAudio

WorxAudio – WaveSeries 18S

The 18S is a high performance bass reflex loudspeaker, designed to extend the low frequency response of Wave Series loudspeaker systems to 31Hz. It has a long excursion eighteen-inch cone driver in a tuned enclosure, providing extended response with extremely low distortion. The 18S is a high performance bass reflex loudspeaker, designed to extend the low frequency response of Wave Series loudspeaker systems to 31Hz. It has a long excursion eighteen-inch cone driver in a tuned enclosure, providing extended response with extremely low distortion. The18S is ideally suited for music reproduction and operates as a low frequency section in conjunction with other Wave Series enclosures, or as a sub bass section for any loudspeaker system requiring enhanced super low frequency (SLF) performance. The sturdy multi-ply plywood enclosure, with a catalyzed polyurethane finish, is designed to withstand the most demanding portable applications. A perforated, powder coated steel grill with a high transmission ratio offers excellent protective properties. The 18S can be purchased in two versions. The portable configuration has large recessed handles and a mid/high pole receptacle, while the installation version has a standard twelve point flyware system. Both are available in white, dark gray or unfinished exterior. The 18S loudspeaker is designed to satisfy a wide variety of low frequency audio applications and offers extraordinary performance and value.
    Speakers
See the product
soundtube-IPD4-CM52-BGM_1200px|soundtube-IPD4-CM52-BGM_1200px
  • SoundTube

SoundTube – IPD4-CM52-BGM

The IPD4-CM52-BGM is a 5.25-inch in-ceiling Dante speaker that includes connection for up to three additional non-Dante SoundTube speakers. The IPD4-CM52-BGM gives integrators an economical way to expand in-ceiling speaker zones on a Dante network. This speaker incorporates a 5.25-inch (134 mm) polypropylene woofer with rubber surround and 0.75-inch (19 mm) silk dome tweeter in a ported steel backcan. In addition to its PoE connection to the SoundTube STNet Switch, the IPD4-CM52-BGM can power up to three additional non-IP speakers. Each IPD4 speaker can be broken down into 2 channels; IPD4 speakers are matched in a system with standard passive SoundTube speakers of the same type. All IPD4 speakers come in both an active and a passive version. As with SoundTube's other IPD in-ceiling speakers, IPD4 speakers feature BroadBeam Ring technology for broad, even dispersion of high frequencies and include SoundTube's exclusive SpeedWing quick-mounting technology.
    Speakers
See the product
cp124
  • Cadac

Cadac – CP124

The CP124 beam forming array module with internal passive crossovers between LF and HF way. It is intended as basic beamforming column loudspeaker for the CADAC product range. The combination of mapping optimization and direct array definition is the most comprehensive and powerful loudspeaker management system on the market. The CP124 is a self-powered 2-way high-end beam forming array loudspeaker, which features 12 x 4" wideband woofers and 12 passive crossovers, for 36 x 1" dome tweeters. Due to the fully integrated connection hardware, the column can be stacked to realize larger systems with up to 14 meters of acoustic length. Internally, one CP124 has 12 amplifier and 12 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the vertical dispersion can be adjusted and optimized according to the listener area.

    Speakers
See the product