Cart
← Back to Product Catalog

PreSonus – StudioLive 18sAI subwoofer

Speakers

More details

Similar Products

6301DT Broadcast Studio
  • Fostex

Fostex – 6301DT

After over 35 years as the industry standard in active confidence monitoring, the Fostex 6301 has officially entered the networked-audio age with the release of the 6301DT, the world's first ultra-rugged Dante-enabled Fostex monitor. With the same physical dimensions as the current 6301N, the 6301DT finally answers the challenge of how to quickly and easily set up a portable or fixed monitoring solution on a Dante network. Broadcast facilities, studio, conference rooms, houses of worship, medical centers, theatres, and installations of all types can now benefit from the rock-solid and trusted tool of audio professionals everywhere. 

Main Features

• 20W Class-D power amplifier for higher output level and less power consumption.

• Dedicated 4-inch full range driver for clear audio reproduction.

• RJ45 Dante & 1/4” TS analog inputs.

• Supports sample rates up to 96kHz via Audinate’s Ultimo chip.

• Two channels of monitoring in one monitor: acts as a two-channel device on the Dante network, with a switch on the back panel to select channel 1, 2 or 1+2 (mixed) for output.

• Ultra-rugged die-cast aluminum enclosure.

• Recessed front-panel knob, switch & speaker grille to prevent inadvertent damage in case of a fall.

• Switching power supply accepts 100 V to 240 V AC.

• Physical dimensions identical to the rest of the 6301N series for easy upgrade.

• Optional EB-6301 mounting bracket allows easy surface-mounting at any angle.

Specifications

Speaker Section:

Enclosure type:                  Closed

Unit:                                    4” Full Range

Frequency response:         70 Hz – 15k Hz

Sound Pressure Level:       85dB / W (1m)

Maximum SPL:                   98dB

Amplifier Section:

Inputs:                                Dante Input (RJ45), 1/4” TS Phone (unbalanced)

Analog Input Impedance:   10k ohm or more

Rated output:                      20W

Distortion (T.H.D.):             0.05% (1kHz / 1W output)

Residual Noise:                  -65dBV

Input Sensitivity:                 Analog (unbalanced): -14 dBV (0.2 Vrms)

General:

Dimensions:                       120 (W) x 189 (H) x 120 (D) mm

Weight:                               2.3kg

Power Requirement:          AC 100 – 240V (50/60Hz)

Power Consumption:          10W

    Speakers
See the product
cm62-bgm-ii_black_grille_1
  • SoundTube

SoundTube – IPD4-CM62-BGM-II

Offering an economical option for expansion of audio coverage in a digital speaker system, this Dante®-enabled coaxial in-ceiling speaker has output terminals for connection and power of up to three additional standard CM62-BGM speakers. The speaker incorporates one 6.5 inch (165 mm) polypropylene woofer with rubber surround and one 1.0 inch (25.4 mm) silk dome tweeter. BroadBeam Ring™ technology and a tuned port on the baffle provide smooth off-axis performance, mid-range clarity and bass response to 60 Hz (-10 dB). Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are accomplished via software. When combined with standard speakers, the four-speaker cluster can be split and configured to handle two separate channels of audio. Mounting hardware is included and features SoundTube®'s SpeedWing™ constant-tension fixed-wing mounting system, which accommodates material thicknesses ranging from 0.035 in (0.9 mm) to 2.38 in (60.4mm). UL 60065 and 2043 listed. Color-coded (green) tile bridge, UL listed conduit clamp and paint shield are included.

    Speakers
See the product