Cart
← Back to Product Catalog

NWP400

I/O Interfaces

More Details

Similar Products

ctp-systems-DIO88|ctp-systems-DIO88
  • CTP Systems

CTP Systems – DIO88

The DIO88 is an inexpensive way to get your analogue signals into and out of the Dante network. The unit has eight XLR inputs and eight XLR outputs. The secondary Dante network connector can be selected to operate either in redundant mode or as a switch output to daisy chain more Dante equipped devices. The DIO88 is an inexpensive way to get your analogue signals into and out of the Dante network. The unit has eight XLR inputs and eight XLR outputs. The secondary Dante network connector can be selected to operate either in redundant mode or as a switch output to daisy chain more Dante equipped devices. The init includes a power indicator and network connection indication on the RJ45 jacks. 
    I/O Interfaces
See the product
arista-ars-1616
  • Arista

Arista – ARS-1616

E-Vocal MYRIAD are multiple channel analog input and analog output Dante converters. There are two models that make up the E-Vocal MYRIAD product:

  • E-Vocal ARS-1616
  • E-Vocal ARS-3232

These models are 1U rack mount analogue converters designed to transfer 16 or 32 analogue audio channels over a Dante network in both directions. Space-saving 25-pin D-sub connectors are provided for use with optional breakout boxes to input and output balanced line-level analogue audio signals. Two etherCON connectors (Dante Primary/Secondary) are available for redundant operation using two separate networks. For high availability operation requirements, dual AC input and dual PoE power sources are available for redundant operation. The units feature indicators for operation status and current sample rate as well as overload LEDs for each input and signal LEDs for each input and output. Any other settings, such as sampling frequency, channel routing or latency, can be made by the free “Dante Controller” computer application. The sampling frequency, power source status, will be displayed on the 2×20 character display located on front bezel. More info: https://www.aristaproav.com/product/myriad/

    I/O Interfaces
See the product
PIC_CDT100_MK3_002
  • Clockaudio

Clockaudio – CDT 100 MK3

The Clockaudio Dante Transporter is an advanced professional Dante communication product which combines audio and control transmission across a standard IP network. Based on high performance and pre-configurable hardware platform it guarantees perfect sound quality. The CDT 100 Mk3 has a variety of uses including but not limited to boardrooms, video and conference rooms, or any place else where multiple microphones and control devices are connected back to the AV equipment cabinet.

Features:

• Easy to install with under table mounting

• Dante Audio and control signals transported over standard IP network

• 4 audio inputs, with gain control, high pass filters and Phantom Power

• 2 line-level outputs with high pass filters

• Up to 6 units may be daisy chained

• 4 Touch Switch ports compatible with all logic enabled Clockaudio devices.

• Open API for interfacing with Control Systems

• Compatible with any Dante capable audio DSP

    I/O Interfaces
See the product