Focusrite – RedNet MP8R


More details

Similar Products

SX-AD8
  • Sonosax

SONOSAX – SX-AD8+

Inputs / Outputs

8x Mic/Line inputs, electronally balanced on XLR-3F, with phase reversal, 48V phantom and LF cut with level control on the front panel
4x AES3 transformer balanced outputs on multi-pin connector
Optional audio over IP on RJ45 connector, for AVB and Dante

Performance

135 dB (A-weighted) overall dynamic range
90kHz overall frequency response @192 kHz
40 bits processing
24bits 48/96/192 kHz

User Interface

Using front panel push-buttons
WiFi dynamic web interface
through SX-R4+ user interface

Power

External DC 9..18V on Hirose 4pins
Class 1 IEEE 802.3af PoE (with Dante option board)

Mechanical

Machined aluminum housing
Overall dimension: 200 x 50 x 144.5 mm (7.87” x 1.96” x 5.7”)
Weight: 850g / 1.9lbs

    Microphone Preamps
RedNet4_front-600-update
  • Focusrite

Focusrite – RedNet 4

RedNet 4 adds eight of the latest remote-controlled Focusrite mic preamps / line inputs to your RedNet system through a single Ethernet cable. With two selectable DI’s, RedNet 4 provides an effective range of analogue inputs for your system. The unit includes Focusrite’s world-class precision A-D conversion. Mic/Line/DI selection, gain, phantom power, HPF and metering are also accessible from the front panel. The benefit of remote control microphone pre-amp gain is that you can keep the mic pre close to the source (so the analogue cable run is minimal) while still setting gain stages from the control room.
    Microphone Preamps
wisycom-mrk980
  • WisyCom

Wisycom – MRK980

Wisycom's MRK980 is a true diversity, ultra-wideband dual channel receiver.  WWisycom's MRK980 is a true diversity, ultra-wideband dual channel receiver.  With its 1090MHz of band switching, it ensures the users an exceptional band flexibility, combined with a superb selectivity and intermodulation immunity, for best operating performances of the wireless microphone systems. MRK980 also features an internal DSP processor, Wisycom famous Multicompanding system, new Dante compatibility and a completely and renewed user interface, which make this system easy and quick to setup. Features
  • Two channels true diversity receiver (full DSP processing)
  • Up to 1090 MHz bandwidth in 170/1260 MHz range
  • Push to talk (PTT) enabled with dedicated outputs (optional)
  • Analogue, AES/EBU & Dante outputs (with redundancy)
  • Dante machine Synchronized mode: no sample rate delay!
  • Next Gen Multiband front-end filtering:
    • High Q moving filter in 170-230 MHz
    • High Q moving filter in 470-800 MHz
    • High Q moving filter in 960-1160 MHz (DME) (or 806-810 MHz saw filter – Japan)
    • Country specific saw filters: USA 940-960 MHz or Japan 1240-1260 MHz
  • Wideband and Narrowband DSP-FM operation (SW selectable):
    • Narrowband allows 50% more band efficiency (200/250 kHz channel density)
    • Narrowband allows about 3dB extra sensitivity and noise immunity
  • Extreme low noise VCO with ultrafast spectrum scan for optimal quick & easy setup
  • High contrast OLED display
  • Monitor & control through USB and Wisycom Manager 2.0 (computer SW)
  • Expansion slot for GPIO or future additional feature
    Microphone Preamps