Cart
← Back to Product Catalog

Bose – ControlSpace ESP-1600

I/O Interfaces

More details

Similar Products

junger-dap8_tap_1200px|junger-dap8_tap_1200px
  • Jünger

Jünger – Surround Audio Processor D*AP8 TAP EDITION

The D*AP8 TAP EDITION is the ideal solution for automatic and intelligent loudness management in real-time surround TV broadcast playout environments. Level Magic™ ensures maximum audio quality whilst maintaining compliance with all worldwide loudness standards. Multiple audio I/O formats are supported including AES, SDI, MADI, Dante™ and analog. The D*AP8 TAP EDITION is the ideal solution for automatic and intelligent loudness management in real-time surround TV broadcast playout environments. Jünger Audio’s Level Magic™ ensures maximum audio quality whilst maintaining compliance with all worldwide loudness standards. Multiple audio I/O formats are supported including native AES along with optional 3G SDI, MADI, Dante™ and analog, allowing the D*AP8 TAP EDITION to also function as a bridge between different standards such as Dante™, 3G SDI or MADI. The D*AP8 TAP EDITION audio processor features loudness control plus dynamic range processing for up to eight channels of audio. Optional Dolby® audio decoding and encoding including metadata management is also available, along with 5.1 Downmix and automatic Upmix features, sophisticated fail over and voice over solutions. Additionally, Jünger Audio’s Spectral Signature™ dynamic equalizer, a powerful creative tool that allows adaptive control of the spectral balance of your content is a standard feature.
    I/O Interfaces
See the product
monisms-MNS-AMPMC3011A-2P
  • MONISMS

MONISMS – MNS-AMPMC30XXA-2P

The POE DANTE/AES67 Audio Amplifier Modules MNS-AMPMC30XXA-2P, Built-in to your 4-8 ohm speaker, that instantly Dante-enables your speakers.
Dante Audio Amplifier module that drives small 4-8Ω speakers.
The MONISMS Dante Amplifier Modules Power 30W, 4-8Ω load.
The module's audio input is via an Ethernet audio network.
MNS-AMPMC30XXA-2P is powered by standard POE+ and has a MAX power of 30 watts. If there is not POE+ used, It can used the external 19VDC power supply.

[Model:MNS-AMPMC3011A-2P] 1 Channel, 30W Output, [1 Pair Speaker Terminals].
[Model:MNS-AMPMC3012A-2P] 1 Channel, 2*15W Output, [2 Pairs Speaker Terminals].
[Model:MNS-AMPMC3022A-2P] 2 Channels, 2*15W Output, [2 Pairs Speaker Terminals].

    I/O Interfaces
See the product
fp-nml2p
  • RDL

RDL – FP-NML2P

The FP-NML2 is a high quality Dante network to mic/line interface that converts two Dante channels to two balanced outputs. Each output is individually switch-selectable to mic or line level. The FP-NML2 is ideal for adapting standard audio amplifiers or equipment to a Dante network. Model FP-NML2P operates from PoE. The FP-NML2 is a high quality Dante network to mic/line interface that converts two Dante channels to two balanced outputs. Each output is individually switch-selectable to mic or line level. The FP-NML2 is ideal for adapting standard audio power amplifiers, or other audio equipment, to a Dante network. Each line output provides +4 dBu balanced for a network digital audio level of -18 dBFS. Crosstalk is below the noise floor between all outputs across the entire audio spectrum. The noise floor is better than 80 dB below operating level with greater than 18 dB of headroom. The FP-NML2 operates from 24 Vdc and is available in a PoE version: FP-NML2P. If PoE power and an external 24 Vdc supply are both feeding an FP-NML2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. 
    I/O Interfaces
See the product