Cart
← Back to Product Catalog

RDL – RU-LB4P

I/O Interfaces

More details

Similar Products

AudioScience - Iyo Dante
  • AudioScience

AudioScience – Iyo Dante 32.0LR

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 32.0MR provides 32 balanced analog audio inputs and 0 outputs. Each input accommodates microphone through line level signals with a gain range of -60 to +24dBu. +48V phantom power is individually switchable on each input. With RJ-45/StudioHub + GPIO Connector close-up.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

    I/O Interfaces
See the product
Vittoria 64 DR
  • Glensound

Vittoria 64 DR

The Vittoria provides a bridge between two internal and separate Dante and  Ravenna networks. These networks are completely isolated from each other with 100% network security, providing a complete network firewall. Vittoria links 64 channels from each network directly in DSP, allowing the passing of bi-directional audio but with complete isolation and security from each separate network. As each network is isolated, they can operate asynchronously and at different sample rates from each other without any problems. Each network can operate at sample rates from 44.1 kHz up to 96kHz. Features:
  • Provides a firewall between a Dante & Ravenna network interface
  • Acts as a bridge bi-directionally with Dante and AES67/Ravenna Networks
  • Acts as an interface between Dante and full SMPTE ST2110-30
  • 64 input and output channels at sample rates up to 48kHz
  • 32 input and output channels at sample rates up to 96kHz
  • The two networks can operate asynchronously or at different sample rates
  • Support for 44.1-96kHz
    I/O Interfaces
See the product
extron-axi22at_0|extron-axi22at_0
  • Extron Electronics

Extron – AXI 22 AT

The Extron AXI 22 AT is a quarter rack width audio interface for integrating two mic/line sources onto a Dante™-enabled audio system. The Extron AXI 22 AT is a quarter rack width audio interface for integrating two mic/line sources onto a Dante™-enabled audio system. It features two mic or line inputs on a 3.5 mm captive screw connector, with switchable 48 volt phantom power. Input select, gain, and phantom power settings are controllable from the front panel, via DSP Configurator Software, or by SIS command. The AXI 22 AT also features two line level outputs for routing any two Dante channels from the network to the audio system. The AXI 22 AT interfaces with any Dante-equipped audio processor,  and can be powered through PoE.
    I/O Interfaces
See the product