Cart
← Back to Product Catalog

AtlasIED – DNA 7874DL

Amplifiers

More details

Similar Products
  • Yamaha

PC406-DI

The PC-D / DI series are so much more than just high power amplifier. The impressive 20 x 8 input matrix capability of PC-D / DI Series amplifiers combines with Dante I/O to provide dramatic improvements to the versatility of any system. Featuring powerful onboard speaker processors as standard. PC-D / DI series are also compatible with ProVisionaire Touch and ProVisionaire Control, and we can provide customized remote controls if required. 600W x 4 at 8Ω.
  • 4 x 600W at 8Ω
  • 20 x 8 powerful input matrix function
  • Sampling frequency is up to 96k
  • 16ch Dante input/output
  • Speaker processor such as 16 band PEQ, crossover, filters, delay and limiter
  • Yamaha speaker presets
  • Remote control via ProVisionaire Touch/Control
    Amplifiers
  • Dante Ch: 16x16
  • 24-bit, 32-bit
See the product
NPA43_D4
  • Kingray

Kingray – NPA43_D4

NPA43-D4 is a 4*300W8Ω class-D amplifier, which configures with 4-channel Dante input interface and DSP processing solution such as compressor, limiter, noise gate, parameter equalization, matrix routing, delay, etc. Suitable for various scene with demands of sound reinforcement system. The whole series of products are equipped with TCP/IP communication interface, mobile phone App control, GPIO extension control and Mconsole unified management.

◆ Optional 4-channel Dante network audio input  

◆ Support Mconsole and app TCON network control 

◆ IPS color LCD

◆ Built in DSP digital processor

◆ Multiple control modes are supported: USB、TCP/IP、RS232、RS485

◆ Monitor the working state of power amplifier

◆ Call and standby the amplifier by remote

◆ Support balanced XLR input and unbalanced RCA input

◆ Support stereo, bridge, mono, matrix mode,switch by software

◆ Input sensitivity 0dBU / 6dbu setting by software or LCD

◆ Power on state: Power On/Standby

◆ Constant Pressure and Resistance support:100V、70V、8Ω、4Ω

    Amplifiers
See the product
glensound-virgil_1200px|glensound-virgil_1200px
  • Glensound

Glensound – VIRGIL

Packaged in a small & robust format and designed to be permanently mounted in studios wherever a headphone circuit is required, the Virgil provides a simple interface between Dante network audio systems and users headphones. Virgil was the Roman poet who guided Dante through Hell and Purgatory, the Glensound Virgil is a clever little headphone amplifier for providing crystal clear audio into studio & broadcast headphones. Packaged in a small & robust format and designed to be permanently mounted in studios wherever a headphone circuit is required, the Virgil provides a simple interface between Dante network audio systems and users headphones. The Virgil encompasses our unique headphone amplifier circuit which automatically provides the correct output level to match the impedance of the attached headphones (to produce the same volume high impedance headphones require a much greater output level than low impedance). Virgil receives 2 x audio circuits from a Dante network and routes one to the left and the other to the right channel of the headphone amplifier. A front panel volume control allows the user to adjust the output volume. Three mounting holes are supplied to enable the Virgil to be mounted underneath a studio desk in a suitable location for the users headphones. Needing just 1 single network cable to carry both power & audio to the Virgil makes installation very simple. As well as being suitable for low & high impedance headphones our unique headphone amplifier circuit can be connected to both stereo headphones & mono earpieces, making the Virgil suitable for driving television presenters ear pieces. Features
  • Dante audio input
  • Stereo headphone amplifier
  • Can be used with mono earpieces
  • Under desk mounting
  • Small & robust
  • Powered by PoE
  • 6.35 & 3.5mm headphone outputs
  • Up to 96K/ 24 bit audio
    Amplifiers
  • Dante Ch: 2x0
  • 24-bit
See the product