Dante-enabled Products

The Gateway is a DSP-based IP codec which can transport 16 channels across the public internet and any QoS-enabled IP network. It can route compressed and uncompressed IP audio streams throughout the broadcast plant with native support for AES67, ST 2110-30, ST 2022-7, RAVENNA, Livewire+, AMWA NMOS IS-04 and IS-05, Ember+, AES3 and analog I/O as standard. An optional Dante or WheatNet-IP card is also available. This facilitates acting as a media converter to simplify audio routing between a range of equipment using proprietary AoIP protocols like WheatNet-IP, Dante and Livewire, plus devices supporting RAVENNA, AES67 and ST 2110-30. It supports 16 full-duplex audio channels as well as multiple unicasting to 80 endpoints and multicasting. Transport of phase-locked multichannel audio in 5.1 or 7.1 formats is also supported. Configure with the built-in embedded HTML5 Toolbox Web-GUI interface or

Dante / AES67 Network Volume Control

• Rotary Encoder Volume Control with Full-Color LCD Display
• Attenuation Applied to One or Two Dante/AES67 Audio Channels
• Network Audio Channels are Routed Through the D*-NVC2
• Knob Rotation Adjusts Audio Volume Up or Down
• Attenuation Adjustment in 1 dB Steps From 0 to 63 dB then Mute
• Programmable Knob Action Acceleration
• Momentary Knob Push to Mute/Unmute with Screen Indication
• Extended Knob Push to Open Menu
• Menu Allows User to Adjust Output Channel A, B or Both
• Option to Sum Stereo Input to Mono on Outputs A and B Using RDL CONSOLE
• Installer Sets Menu Default and Defines Channel Names Using RDL CONSOLE
• The D-NVC2 May be Remote Controlled by RDL D-NMC1R or D-NLC1R
• Selectable Screen Display Color Themes Using RDL CONSOLE
• Adjusts Levels of Network Audio Signals Routed Through It*
• Displays Audio Attenuation Level Applied to Routed Signals*
• PoE Powered
• Available in Stainless Steel, Black and White

Features:

• 5400W continuous RMS power across 4 × 4 channels
• 4 × 4 channel configuration for multi-zone/immersive setups
• Onboard DSP with intuitive touchscreen interface
• 1G TCP/IP networking with Dante™ enabled protocol support
• Engineered & Made in India for worldwide applications

Features:

• 15000W continuous RMS power for maximum output
• 2 × 2 channel amplifier with Class H+ efficiency
• Digital touchscreen control with onboard DSP
• Dante™ enabled network protocol support with 80 presets
• Made in India with global performance standards

Features:

• 9000W continuous RMS power
• 2 × 2 channels with digital touchscreen control
• Onboard DSP with up to 80 presets
• Dante™ enabled network protocol support
• Proudly Made in India – built for the world stage

A compact A/V switcher in the EasyIP ecosystem, the EasyIP Dock connects in EasyIP cameras, video, and audio to a computer while simultaneously extending that computer’s HDMI output over the network for flexible presentation and conferencing spaces. Features:

• Manages up to four EasyIP cameras or EasyIP video sources with switching and camera control
• 1080p/60 video over USB 3.0 with USB 2.0 backwards compatibility and AEC
• HDMI In converts to EasyIP output for networked extension with simultaneous HDMI output loop
• 8x8 Dante audio matrix (15x13 full cross-point audio matrix)
• EasyIP Multicast allows content sharing with any number of EasyIP endpoints or destinations

The MXW neXt wireless microphone system is the next step in audio for hybrid events. With state-of-the-art wireless transmission, convenient rechargeability, powerful audio processing, and flexible controls and connections, it’s the most versatile wireless audio solution for collaboration. The Microflex® Wireless neXt system is the perfect solution for meeting rooms with flexible seating, rooms where audio cables are impractical, or rooms that are used only occasionally. The MXW neXt wireless microphone system delivers flawless audio for the people in the room and those joining remotely, whether it’s a presentation, team conference, or training session. MXW neXt eliminates inconvenient audio cables, allowing you to place microphones where you want them, when you want them. Wireless microphones accommodate any table arrangement or meeting format, whether it’s a presentation, panel discussion, or board meeting. With a choice of rechargeable transmitters that eliminate the need for disposable batteries, powerful IntelliMix DSP for outstanding sound quality, and the ability to extend audio coverage in larger rooms, MXW neXt is the premier wireless audio solution for meeting and training rooms.

The MXW neXt wireless microphone system is the next step in audio for hybrid events. With state-of-the-art wireless transmission, convenient rechargeability, powerful audio processing, and flexible controls and connections, it’s the most versatile wireless audio solution for collaboration. The Microflex® Wireless neXt system is the perfect solution for meeting rooms with flexible seating, rooms where audio cables are impractical, or rooms that are used only occasionally. The MXW neXt wireless microphone system delivers flawless audio for the people in the room and those joining remotely, whether it’s a presentation, team conference, or training session. MXW neXt eliminates inconvenient audio cables, allowing you to place microphones where you want them, when you want them. Wireless microphones accommodate any table arrangement or meeting format, whether it’s a presentation, panel discussion, or board meeting. With a choice of rechargeable transmitters that eliminate the need for disposable batteries, powerful IntelliMix DSP for outstanding sound quality, and the ability to extend audio coverage in larger rooms, MXW neXt is the premier wireless audio solution for meeting and training rooms.

Yealink AP08 DSP, a cutting-edge digital signal processor, elevates your meeting experience with exceptional automation capabilities. It supports up to 16x16 Dante audio channels, including 8 optimized channels with dynamic AEC, intelligent noise cancellation, and reverberation suppression, as well as 4x4 analog audio channels and two simultaneous USB 3.0 Type-B device interfaces. The AP08 DSP ensures smooth audio transmission and crystal-clear communication. Additionally, it provides PoE+ power for up to three audio devices, simplifying your deployment even further. With Yealink Room Designer software, the AP08 DSP seamlessly integrates automated design and acoustic environment-adaptive technology, setting a new standard for audio quality and convenience in your meetings. Choose Yealink AP08 DSP for an unparalleled audio experience.

The CS10-D ceiling speaker is available in two editions to suit various needs. Featuring support for the Dante audio transmission protocol, the CS10-D seamlessly integrates with a wide range of standard Dante devices, delivering a versatile and convenient collaborative experience. The Loudspeaker features a low-profile (120mm depth) 2-way coaxial design and a removable magnetic suction mesh cover*. The CS10 blends high-quality audio with an elegant, minimalist design, making it a perfect match for contemporary conference rooms.

With 127 wide-range microphones, the Yealink CM50 provides superior audio coverage within a 5-meter radius*. Its advanced beamforming technology supports customized pickup zones, allowing precise control over audio capture and reducing unwanted background noise. The CM50 integrates AI-based sound optimization to ensure immersive sound quality. With support for Dante protocol , it ensures easy integration with other Dante-compatible devices.

The Microflex MXN-6 Networked Pendant Loudspeaker provides high-quality speech reproduction for AV conferencing applications. The PoE-powered MXN-6 is the ideal loudspeaker solution when used as part of a Shure networked conferencing audio system. Combined with Microflex Advance Array Microphones and IntelliMix® DSP solutions, the full Shure Microflex Ecosystem delivers premium audio performance with an unmatched ease of deployment.

The ultimate high-tier, high channel count wireless receiver, Shure ANX4 receives up to 16 channels of Shure Axient Digital or 24 channels of Shure ULX-D wireless audio in a single rack space. Delivering maximum flexibility, ANX4 does not ship preconfigured with active wireless channels, allowing you the opportunity to purchase channels in single- and four-channel increments and activate the exact number of channels you need. Licenses can be activated in one ANX4 and later removed and activated in a different ANX4 as needs change. ANX4 channel licenses can be purchased through the same authorized suppliers ANX4 hardware units are sold (or at Shure.com/anx4) and managed via your ShureCloud user account. All the exceptional features found in award-winning Axient Digital and ULX-D receivers that have made them standards on stages, in facilities, on tour, and on location throughout the world are available in the ANX4**. Whether you operate ANX4 in Axient Digital or ULX-D transmission mode, ANX4 maximizes your budget, rack space, and rack weight in delivering large wireless audio channel counts in a single rack design. What’s more, this 1RU format also enables streamlined antenna configurations for large channel count environments. *ANX4 receiver does not ship preconfigured with active wireless channels. Channel licenses are sold separately and required for operation. **System features are dependent upon activated transmission mode: Axient Digital or ULX-D (ANX4 does not support both systems at one time).

The TeamConnect Ceiling Medium Ceiling Tile (TCC M CT) allows for even easier installation of the TCC M into suspended grid ceilings, thereby reducing installation time and costs for integrators on site. The tile comes in a 60 cm square solution and a 2 ft square solution, primarily for the US market. The TCC M allows integrators the versatility to offer elevated meeting experiences across a range of flexible and hybrid meeting spaces and learning environments. With its adaptive, intelligent beamforming technology, the TCC M ensures Trusted Sennheiser Audio Quality every time. Seamless integration with single cable mode and numerous design and installation options ensure TCC M transforms any room into a hub of collaboration. ​ ​

Relacart has recently launched an innovative ceiling microphone array – a solution integrating cutting-edge AI technology and advanced acoustic engineering, designed to deliver exceptional audio quality in any space. Our ceiling microphone is not just a technological innovation, but also the optimal audio solution for users in venues like conference rooms and classrooms. It ensures every word is accurately conveyed and no sound detail is overlooked.

Features & Benefits

• 384 x 384 networked audio channels (Q-LAN / AES67)
• 128x AEC channels @ 200 ms
• Includes 8 x 8 Software-based Dante channels (licensable up to 256 x 256)
• Dual redundant, hot-swappable power supplies
• Supports up to sixteen (16) Q-SYS NM-T1 tabletop microphone
• Up to 64 VoIP softphone instances
• 96 x 96 Media/WAN channel capacity
• 16 multitrack playback channels (up to 256 with optional stackable feature license)
• 4 multitrack record channels
• Two (2) gigabit Ethernet ports for redundant networked audio
• Two (2) independent, gigabit auxiliary Ethernet ports for segregation of network services such as VoIP, SNMP, LLDP, LDAP and WAN Media streaming
• Onboard 480 GB media drive
• 1 RU form factor

Network I/O or paired with distributed processing. Features & Benefits

• 256 x 256 networked audio channels (Q-LAN / AES67)
• 64x AEC channels @ 200 ms
• Includes 8 x 8 Software-based Dante channels (licensable up to 128 x 128)
• Supports up to twelve (12) Q-SYS NM-T1 tabletop microphones
• Up to 32 VoIP softphone instances
• 64 x 64 Media/WAN channel capacity
• 16 multitrack playback channels (up to 128 with optional stackable feature license)
• 4 multitrack record channels
• Two (2) 2.5 Gbps Ethernet ports for redundant networked audio
• Two (2) 2.5 Gbps independent, auxiliary Ethernet ports for segregation of network services such as VoIP, SNMP, LLDP, LDAP and WAN Media streaming
• Onboard 256 GB media drive
• 1 RU form factor

ZUHD60-2DA is an HDMI 2.0a Dante-enabled AVoIP Decoder that is part of the ZyPerUHD60 product line. It supports IP streaming up to 4KP60 4:4:4 resolution with embedded audio and HDCP 2.3 encryption. This AVoIP decoder has dual 1G LAN ports and a 5-pin Phoenix/Euroblock connector for analog audio out. Other features include USB, IR, and RS-232 (via 3-pin Phoenix/Euroblock).

ZUHD60-2EA is an HDMI 2.0a, Switching, triple-input, Dante-enabled Encoder (Dual HDMI and USB-C) that is part of the ZyPerUHD60 product line. It supports IP streaming up to 4KP60 4:4:4 resolution with embedded audio and HDCP 2.3 encryption. This encoder has a 5-pin Phoenix/Euroblock connector for analog audio in/out and gigabit copper.

DuetD-5-WP is a wallplate decoder designed for clean, in-wall installations. It features an HDMI output and two USB-C ports, delivering full USB-over-IP support consistent with the capabilities of Visionary’s 5 Series decoders. The DuetD-5-WP is ideal for setups using USB cameras, touch panels and other HID peripherals in soft codec environments.

The DuetE5-WP-C wallplate encoder combines USB-C and HDMI inputs into a two-gang form factor. It enables AV-over-IP encoding of both 4K60 4:4:4 video and USB sources from USB-C or HDMI-equipped devices, making it ideal for BYOD environments. The USB-C port supports DisplayPort Alt Mode video, USB-over-IP and AES67/Dante audio embedding and de-embedding — all through a single connection — while maintaining interoperability with Visionary’s 5 Series ecosystem.

Duet Wallplate Encoder w/Bluetooth®

Introducing the next-generation DuetE5-WP-BT 4K60 4:4:4 Wallplate AV over IP Encoder from Visionary Solutions. Building on the widely adopted PacketAV® Duet Wallplate Encoder, which brought true convergence of Dante®/AES67 and Video over IP in a convenient wallplate form-factor, the DuetE5-WP-BT raises the bar with enhanced features and powerful capabilities.

The DuetE5-WP-BT delivers stunning 4K60 4:4:4 video with accurate color reproduction and smooth motion handling, ensuring exceptional performance in various AV applications. The next-generation wallplate encoder continues to support Dante®/AES67 audio, providing seamless integration with professional audio systems and networks.

The DuetE5-WP-BT features built-in bi-directional Bluetooth® wireless audio connectivity, enabling effortless streaming of audio from Bluetooth®-enabled devices and expanding the range of supported audio sources. The wallplate encoder can be easily mounted in a wall, tabletop, lectern, or floor box using a standard 2-gang US or UK back box, simplifying installation and offering a sleek, unobtrusive design. The DuetE5-WP-BT connects to power (standard POE) and Ethernet using only a single category cable, streamlining deployment and reducing cable clutter.

 Wallplate Encoder w/HDMI Only

Visionary Solutions presents the next generation DuetE5-WP-H 4K60 4:4:4 Wallplate AV over IP Encoder, building upon the revolutionary PacketAV® Duet Wallplate Encoder that has transformed networked AV. Experience true convergence with a single platform that supports Dante®/AES67 and Video over IP in an elegant wallplate form-factor.

The DuetE5-WP-H delivers exceptional 4K60 4:4:4 video and Dante®/AES67 audio over a single Gigabit Ethernet port, offering superior performance and streamlined installation.

The next-generation DuetE5-WP-H features an HDMI-only input, providing a straightforward solution for hassle-free installations
in various applications.

The DuetE5-WP-H is designed for easy mounting in walls, tabletops, lecterns, or floor boxes using a standard 2-gang US or UK back box, offering flexibility for diverse installation requirements.

Duet Wallplate Encoder

Visionary Solutions introduces the next-generation E5-WP 4K60 4:4:4 AV over IP wallplate encoder, a cutting-edge solution for professional AV distribution in today’s converged AV/IT environment. Building on the success of Visionary’s PoE 4K UHD over IP encoders and decoders, which offer cinema-quality video and ultra-low latency, the E5-WP brings advanced capabilities and streamlined design for seamless integration in any installation.

The E5-WP wallplate encoder delivers stunning 4K60 resolution with 4:4:4 chroma subsampling, ensuring vibrant colors, crisp detail, and smooth motion handling for an unparalleled visual experience.

With an impressive sub-frame latency, the E5-WP provides visually lossless performance, making it the ideal choice for real-time applications, such as live events, video conferencing, and interactive displays.

The E5-WP can be deployed on any industry-standard IP network, whether it’s an existing enterprise network or a physically separate private network. This versatility enables AV designers and IT directors to offload video traffic without intermingling it with data or voice, ensuring optimal performance and security.

Crown ComTech D Series amplifiers are designed for versatility, flexibility, and ease of installation. With both Dante inputs and outputs, built-in DSP, power sharing, Lo-Z/Hi-Z switching, and a simple to use web configuration interface, ComTech D amplifiers are ideal for meeting the changing demands of diverse installed audio applications. The CTD-8125 delivers 125 watts per channel of legendary Crown amplification when all channels are driven equally. Asymmetrical power sharing enables each set of four channels to share 500W in any ratio, offering unparalleled flexibility. Built-in DSP allows outputs to be tuned specifically for every application and provides the ability to create custom speaker tunings. Factory JBL SpeakerTunings for select JBL models, including Control 400 Series ceiling speakers, are included to simplify the optimization of an all-HARMAN solution. The amplifier can be configured through the intuitive web interface with any computer or tablet and without the need to install proprietary software. It uses HARMAN's HControl protocol to communicate natively with BSS OMNI Processors or AMX MUSE Automation Controllers and includes an easy-to-use API for integration with 3rd-party control systems. This compact amplifier requires only 1 RU rack space.

Crown ComTech D Series amplifiers are designed for versatility, flexibility, and ease of installation. With both Dante inputs and outputs, built-in DSP, power sharing, Lo-Z/Hi-Z switching, and a simple to use web configuration interface, ComTech D amplifiers are ideal for meeting the changing demands of diverse installed audio applications. The CTD-4125 delivers 125 watts per channel of legendary Crown amplification when all channels are driven equally. Asymmetrical power sharing enables the four channels to share the full 500W in any ratio, offering unparalleled flexibility. Built-in DSP allows outputs to be tuned specifically for every application and provides the ability to create custom speaker tunings. Factory JBL SpeakerTunings for select JBL models, including Control 400 Series ceiling speakers, are included to simplify the optimization of an all-HARMAN solution. The amplifier can be configured through the intuitive web interface with any computer or tablet and without the need to install proprietary software. It uses HARMAN's HControl protocol to communicate natively with BSS OMNI Processors or AMX MUSE Automation Controllers and includes an easy-to-use API for integration with 3rd-party control systems. This compact 1RU, ½ rack width device can be installed in a rack, under a table, or on a wall using the included mounting hardware.

Crown ComTech D Series amplifiers are designed for versatility, flexibility, and ease of installation. With both Dante inputs and outputs, built-in DSP, power sharing, Lo-Z/Hi-Z switching, and a simple to use web configuration interface, ComTech D amplifiers are ideal for meeting the changing demands of diverse installed audio applications. The CTD-2125 delivers 125 watts per channel of legendary Crown amplification when all channels are driven equally. Asymmetrical power sharing enables the two channels to share the full 250W in any ratio, offering unparalleled flexibility. Built-in DSP allows outputs to be tuned specifically for every application and provides the ability to create custom speaker tunings. Factory JBL SpeakerTunings for select JBL models, including Control 400 Series ceiling speakers, are included to simplify the optimization of an all-HARMAN solution. The amplifier can be configured through the intuitive web interface with any computer or tablet and without the need to install proprietary software. It uses HARMAN's HControl protocol to communicate natively with BSS OMNI Processors or AMX MUSE Automation Controllers and includes an easy-to-use API for integration with 3rd-party control systems. This compact 1RU, ½ rack width device can be installed in a rack, under a table, or on a wall using the included mounting hardware.